HMI     |      2024-07-19 14:57


ED-HMI2220 Series Features
Functions Parameters
CPU Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
RAM 1GB/2GB/4GB/8GB LPDDR4 RAM optional
Storage 0GB/8GB/16GB/32GB eMMC optional, Support micro-SD Card
Wireless 4G/LTE optional, 2.4GHz & 5GHz dual-band WiFi, Bluetooth 5.0
Interface 3 x Gigabit Ethernet, 1 x HDMI Type A, 1 x USB 3.0, 2 x USB 2.0, 1 x Micro USB
Power Input DC 9V~36V with reverse polarity, overvoltage & overcurrent protection; 3.5mm phoenix connector with screw locked, PoE optional
Other RTC, Hardware Watch Dog, EEPROM & Crypto authentication, Supercaps backup power supply optional, Reset button, Audio output & Microphone, 4 LED indicators
Operating Temperature -20℃~60℃
Mechanical High-quality metal case, Embedded front installation

ED-HMI2220 Series Selection Guide
Model No. LCD Size Resolution Aspect ratio # of Colors  Luminance
Viewing Angle
(# of points)
HMI2220-070C 7" 1024x600 16:9 16.7M 400 160°/160° 10 188 x 123 x 43.5 1.1
HMI2220-101C 10.1" 1280x800 16:10 16.7M 400 160°/160° 10 258 x 172 x 41 1.5

Document Download


CPU Broadcom BCM2711, quad core Arm Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GH
H.265(HEVC), up to 4Kp60 decode
H.264, up to 1080p60 decode, 1080p30 encode)
GPU OpenGL ES 3.1 & Vulkan 1.0
Memory  1GB/2GB/4GB/8GB LPDDR4-3200 SDRAM可选
Storage Options for 0GB, 8GB, 16GB, 32GB eMMC storage
Micro SD card, supporting to select the 00GB/32GB/64GB SD card
mSATA SSD (optional)

Operating System
- Raspberry Pi OS(Desktop) 32-bit
- Raspberry Pi OS(Lite) 32-bit
- Raspberry Pi OS(Desktop) 64-bit
- Raspberry Pi OS(Lite) 64-bit

Front I/O
Camera Built-in 8-megapixel front camera(optional)

Side I/O
1 x DC IN, 2-Pin 3.5mm spacing phoenix terminals with screw holes.
It supports 9V~36V input, the signal is defined as VIN+/GND.
1 x Audio In/Stereo Out, 3.5mm audio jack connector. It can be used as MIC IN and LINE OUT.
- When a headphone is connected, the audio output switches to the headphone.
- When no headphone is connected, the audio output switches to the speaker.
1000M+PoE Ethernet
1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network. PoE can be supported through expansion module.
1000M Ethernet
2 x adaptive 10/100/1000M ethernet ports, RJ45 connector. It can be used to access the network.
USB 3.0 1 x USB3.0 port, type A connector, support up to 5Gbps.
HDMI 1 x HDMI port, type A connector. It compatibles with HDMI2.1 standard and supports 4K 60Hz.
USB 2.0 2 x USB 2.0 ports, type A connector, supporting up to 480Mbps transmission rate.
Antenna  2 x SMA ports, using to connect 4G antenna and Wi-Fi/BT antenna.
SD Card Slot 1 x Micro-SD card slot, using to install SD card. It supports booting the OS from SD card.
SIM Card Slot
1 x Nano SIM card slot, uses to install SIM card for getting 4G signal.
Micro USB 1 x Micro USB port, supports to flash eMMC for the system.
Speaker 1 x PA output, built-in a 4Ω 3W speaker.

Buttons and Indicators
Reset 1 x Reset button, which can reset the device.
PWR 1 x red power indicator, uses to check the status of device power-on and power-off.
4G 1 x green 4G indicator, uses to check the status of 4G singal.
ACT 1 x green system indicator, uses to check the working status of device.
USER 1 x green user indicator, user can customize a status according to actual application.

Expansion Performance
EEPROM Supports 4K byte storage and improves the ease of use of device
It can be matched to realize the required upper layer application and improves
the security of device.
RTC with CR1220 battery backup, which can ensure that the system clock is not affected by device power-off.
Note:A CR1220 battery is provided by default in China
A tip or an abnormity can be configurated according to actual application, which realizes the alarm function.
Watch Dog
Realize the hardware Watch Dog based on the RTC alarm function to ensure the reliability of device.

Expansion I/O
12V 1A 
3 x DC OUT, 2-Pin 2.0mm spacing connector, support 12V 1A output. These pins are defined as GND/12V, reserve to provide power supply for extended LCD.
40-pin GPIO
1 x GPIO, 2x20-Pin 2.54mm pitch header, uses to lead out the GPIO ports of CM4.
- These pins are defined as GPIO1~GPIO27/3V3/5V2/GND
- Compatibles with expansion modules, and reserves to connect expansion accessories.
10-pin GPIO 
1 x GPIO Pin Header, 2x5-pin 2.54mm pitch header, uses to lead out the expansion GPIO ports. User can customize the function according to actual application, these pins are defined as 8xGPIO/3V3/GND.
1 x FPC HDMI, 40-pin 0.5mm spacing FPC connector, which can be reserved to connect extended LCD, supports USB/I2C touch screen and backlight adjustment.
USB 2 x USB 2.0, 5-pin 1.5mm spacing WTB connector, which can be expanded USB 2.0 ports.
PCIe 1 x mSATA port, Mini PCIe connector, which supports to connect mSATA SSD.
  ED-HMI2220-070C ED-HMI2220-101C
LCD Size 7.0" TFT 10.1" TFT
Resolution 1024 x 600 1280x800
Colors 16.7MB 16.7MB
Active Area 154.21mm(H) x 85.92mm(V) 216.576mm(H) x 135.36mm(V)
Backlight LED LED
MTBF >30000h >30000h
Luminance 400cd/m^2 400cd/m^2
Contrast Ratio  800:1 1000:1
Response Time 30ms 30ms
Viewing Angle(CR≥10) 85°(L)/85°(R)/85°(U)/85°(D) 80°(L)/80°(R)/80°(U)/80°(D)

Touch Screen
Type  Multi-point Capacitive Touch Screen
Transmittance ≥85%
Connection Method
Controller Interface
Driver Support Linux
Multi-touch 10 points
Surface Hardness

Electrical Characteristics
Input Voltage 9V ~ 36V DC
Maximum Power Consumption

Mechanical Characteristics
  ED-HMI2220-070C ED-HMI2220-101C
Dimensions 188mm x 123mm x 43.5mm (WxDxH, antenna is not included.) 263mm x 177mm x 42.5mm (WxDxH, antenna is not included.)
Weight 1Kg 1.5Kg
Installation Embedded front installation Embeded installation, including front installation and rear installation.
2.4GHz and 5GHz dual-band Wi-Fi with antenna.
- 2.4GHz Wi-Fi: Compatible with IEEE 802.11 b/g/n
- 5GHz Wi-Fi: Compatible with IEEE 802.11 a/n/ac
Bluetooth 5.0 with antenna, compatible with 2402MHz ~ 2480MHz frequency.
4G Connect with various 4G LTE modules through the Mini PCIe interface.

EC20-CN Module (China/India)
LTE TDD: B38/B39/B40/B41
GSM: 900/1800MH
EC25-AFX Module (North America)

EC25-AUX Module (Latin America/Australia/New Zealand)
LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28
WCDMA: B1/B2/B4/B5/B8

EC25-EUX Module (Europe/Middle East/Africa/Thailand)
LTE-FDD: B1/B3/B7/B8/B20/B28A
LTE-TDD: B38/B40/B41

Environmental & Regulatory
Operating Temperature
-20°C ~ 60°C
Storage Temperature
-25°C ~ 60°C
Ambient Humidity
5% ~ 95%(non-condensing)
FCC 47 CFR Part 15 Subpart B
EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3
EN 55032/EN 55035/
EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52
EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2

 System Block Diagram

Dimension Unit:mm




Oder Information

More Products

ED-HMI Series Selection Guide

Model No. CPU LCD Size Audio Input & Output #Ethernet RS485/RS232 4G SSD Supercaps
ED-HMI2002 Pi 4 7"/10.1" x 1 - - - -
ED-HMI2020 CM4 7"/10.1" x 1 - - - -
ED-HMI2120 CM4 7"/10.1" x 2
ED-HMI2220 CM4 7"/10.1" x 3 -
ED-HMI2320 CM4 12.1"/15"/15.6"/17"/21.5" x 1 or x 2 -
ED-HMI3010 Pi 5 7"/10.1" - x 1 - - - -
ED-HMI3020 Pi 5 7"/10.1" x 1 - -

Related Products