| ED-HMI2320 Series Features |
| Industrial Panel PC Based on Raspberry Pi CM4 |
| Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz |
| Up to 8GB LPDDR4 RAM and 32GB eMMC storage |
| Support Micro SD card and mSATA SSD storage expansion |
| Support HDMI+LVDS touchscreen dual displays, HDMI supports up to 4Kp60 |
| 1 x Gigabit Lan (dual Lans are optional) |
| 2 x USB 3.0, 2 x USB 2.0(optional) & 3 x RS232 |
| 2.4GHz and 5GHz dual-band Wi-Fi, Bluetooth and 4G LTE |
| Wide voltage power input range of DC 9V~36V with reverse polarity protection, overvoltage protection, and overcurrent protection |
| Integrated supercapacitor (backup power supply, optional), RTC, Watch Dog, EEPROM and crypto authentication |
| High-quality metal case, compatible with desktop installation |
Document Download
ED-HMI2320-121C DatasheetED-HMI2320-150C Datasheet
ED-HMI2320-156C Datasheet
ED-HMI2320-170C Datasheet
ED-HMI2320-215C Datasheet
Explore in-depth reviews and coverage of ED-HMI2320 by leading international media outlets! Click the links to learn more：
CNX SOFTWARE
Specifications
| System | |
| CPU | Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz |
| VPU |
H.265(HEVC), up to 4Kp60 decode H.264, up to 1080p60 decode, 1080p30 encode |
| GPU | OpenGL ES 3.1 & Vulkan 1.0 |
| Memory | Options for 1GB, 2GB, 4GB, 8GB LPDDR4-3200 SDRAM |
| Storage |
Options for 0GB, 8GB, 16GB, 32GB eMMC storage Micro SD card (user storage expansion) Options for 128G and 256G mSATA SSD |
|
Software
|
|
| Operating System |
- Raspberry Pi OS(Desktop) 32-bit
- Raspberry Pi OS(Lite) 32-bit
- Raspberry Pi OS(Desktop) 64-bit
- Raspberry Pi OS(Lite) 64-bit
|
|
Side I/O
|
|
| Power | 1 x DC IN, DC Jack connector, with reverse polarity protection, overvoltage protection, and overcurrent protection. It supports 9V~36V input. |
| HDMI | 1 x HDMI port, type A connector, which compatibles with HDMI 2.1 standard and supports 4K 60Hz. |
| COM | 3 x RS232 port, DB9 male connector, using the 2, 3 and 5 pins, the corresponding signal is defined as RX/TX/GND. |
| USB 3.0 | 2 x USB 3.0 ports, type A connector, support up to 5Gbps. |
| 1000M Ethernet | 1 x adaptive 10/100/1000M ethernet port, RJ45 connector. It can be used to access the network. PoE can be supported through expansion module. |
| USB 2.0 | 2 x USB 2.0 ports, type A connector, which support up to 480Mbps. |
| MIC IN | 1 x MIC Input, 3.5mm audio jack connector(red), which can connect to microphone. |
| LINE OUT | 1 x MIC Input, 3.5mm audio jack connector(red), which can connect to microphone. |
| Antenna (optional) | 2 x SMA ports, use to connect 4G antenna and Wi-Fi/BT antennas. |
| Buttons and Indicators | |
| Power Switch |
1 x Power button, with led indicator Press the button for a short time to start up the device and the indicator will light up. Press the button for a long time to shut down the device forcibly, then the indicator will be off. |
| Internal I/O | |
| Speaker |
1 x PA output, built-in two 8Ω 2W stereo speakers.
|
| SD Card Slot | 1 x Micro SD card slot, which is used to install SD card for storing user data. |
| SIM Card Slot | 1 x Standard SIM card slot, which is used to install SIM card for getting 4G signal. |
| mSATA | 2 x mSATA ports, Mini PCIe connector, which is used to connect 4G Module and mSATA SSD. The user can select 128G or 256G mSATA SSD. |
| Expansion Performance | |
| Auto-boot |
It supports automatic power-on function by default.
|
| EEPROM | It supports 4K byte storage and improves the ease of use of device. |
| Crypto Authentication | It can be matched to realize the required upper layer application and improves the security of device. |
| RTC |
Ensure that the system clock is not affected by device power-off. Note: A CR2032 battery is provided by default in China. |
| Buzzer | A tip or an abnormity can be configurated according to actual application, which realizes the alarm function. |
| Watch Dog | Realize the hardware Watch Dog based on the RTC alarm function to ensure the reliability of device. |
| LCD | |||||
| ED-HMI2320-121C | ED-HMI2320-150C | ED-HMI2320-156C | ED-HMI2320-170C | ED-HMI2320-215C | |
| LCD Size | 12.1" TFT | 15.0" TFT | 15.6" TFT | 17.0" TFT | 21.5" TFT |
| Resolution | 800 x 600 | 1024 x 768 | 1920 x 1080 | 1280 x 1024 | 1920 x 1080 |
| Screen Ratio | 4:3 | 4:3 | 16:9 | 4:3 | 16:9 |
| Display Colors | 16.7MB | 16.7MB | 16.7MB | 16.7MB | 16.7MB |
| Active Area | 246mm(H) x 184.5mm(V) | 304.128mm(H) x 228.096mm(V) | 344.16mm(H) x 193.59mm(V) | 337.92mm(H) x 270.34mm(V) | 476.64mm(H) x 268.11mm(V) |
| Backlight | LED | E-LED | E-LED | LED | LED |
| MTBF | 50000h | 50000h | 50000h | 50000h | 50000h |
| Pixel Pitch | 0.3075mm x 0.3075mm | 0.099mm x 0.297mm | 0.05975mm x 0.17925mm | 0.264mm x 0.264mm | 0.08275mm x 0.24825mm |
| Contrast Ratio | 1000:1 | 1000:1 | 3000:1 | 1000:1 | 4000:1 |
| Response Time | 5ms | 5ms | 5ms | 5ms | 6.5ms |
| Viewing Angle (CR≥10) | 70°(L)/70°(R)/50°(U)/60°(D) | 89°(L)/89°(R)/89°(U)/89°(D) | 89°(L)/89°(R)/89°(U)/89°(D) | 85°(L)/85°(R)/75°(U)/85°(D) | 89°(L)/89°(R)/89°(U)/89°(D) |
| Input Type | LVDS | LVDS | LVDS | LVDS | LVDS |
| Touch Screen | |
| Type | Multi-point Capacitive Touch Screen |
| Multi-touch | 10 points |
| Transmittance | 85％±5% |
| Communication Interface | USB |
| Touches | More than 50 million times |
| Resolution | 4096 x 4096 |
| Surface Hardness | Not less than 6H |
| Electrical Characteristics | |
| Input Voltage | 9V ~ 36V DC |
| Maximum Power Consumption | 60W(Max) |
|
Mechanical Characteristics
|
|||||
| ED-HMI2320-121C | ED-HMI2320-150C | ED-HMI2320-156C | ED-HMI2320-170C | ED-HMI2320-215C | |
|
Dimensions (W x H x D, mounting bracket is not included.) |
332mm x 270mm x 69mm | 380.8mm x 307.6mm x 49.7mm | 417mm x 266.8mm x 56.3mm | 414.6mm x 346.6mm x 51mm | 559.4mm x 356.4mm x 61.8mm |
| Weight | 3.25Kg | 4.05Kg | 4.05Kg | 6.3Kg | 6.5Kg |
| Installation | Wall mounting and desktop mounting | ||||
|
Wireless
|
|
| Wi-Fi/Bluetooth (optional) |
2.4GHz & 5GHz dual-band Wi-Fi and Bluetooth with antenna. 2.4GHz Wi-Fi: Compatible with IEEE 802.11 b/g/n 5GHz Wi-Fi: Compatible with IEEE 802.11 a/n/ac The Bluetooth supports 2402MHz ~ 2480MHz frequency. |
| 4G (optional) |
Connect with various 4G LTE modules through the Mini PCIe interface, with antenna. EC20-CN Module (China/India) LTE FDD: B1/B3 LTE TDD: B38/B39/B40/B41 TDSCDMA: B34/B39 WCDMA: B1 CDMA 1x/EVDO: BC0 GSM: 900/1800MH EC25-AFX Module (North America) LTE-FDD: B2/B4/B5/B12/B13/B14/B66/B71 LTE-TDD WCDMA: B2/B4/B5 GSM/EDGE EC25-AUX Module (Latin America/Australia/New Zealand) LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28 LTE-TDD: B40 WCDMA: B1/B2/B4/B5/B8 GSM/EDGE: B2/B3/B5/B8 EC25-EUX Module (Europe/Middle East/Africa/Thailand) LTE-FDD: B1/B3/B7/B8/B20/B28A LTE-TDD: B38/B40/B41 WCDMA: B1/B8 GSM/EDGE: B3/B8 |
| Environmental & Regulatory | |
| Operating Temperature | -25°C ~ 60°C |
| Storage Temperature | -25°C ~ 60°C |
| Ambient Humidity | 5% ~ 95% (non-condensing) |
| Certifications |
FCC
FCC 47 CFR Part 15 Subpart B
CE
EN IEC 62368-1/EN IEC 62311/EN IEC 61000-3-2/EN IEC 61000-3-3
EN 55032/EN 55035/
EN 301 489-1/EN 301 489-3/EN 301 489-17/EN 301 489-52
EN 301 328/EN 301 440/EN 301 511/EN 301 908-1/EN 301 908-2
|
System Block Diagram
Dimension Unit:mm
ED-HMI2320-121C
ED-HMI2320-150C
ED-HMI2320-156C
ED-HMI2320-170C
ED-HMI2320-215C
Order Information
More Products
|
ED-HMI Series Selection Guide |
|||||||||
| Model No. | CPU | LCD Size | Audio Input & Output | #Ethernet | RS485/RS232 | 4G | SSD | DI/DO | Supercaps |
| ED-HMI2002 | Pi 4 | 7"/10.1" | √ | x 1 | - | - | - | - | - |
| ED-HMI2020 | CM4 | 7"/10.1" | √ | x 1 | - | - | - | - | - |
| ED-HMI2120 | CM4 | 7"/10.1" | √ | x 2 | √ | √ | √ | - | √ |
| ED-HMI2220 | CM4 | 7"/10.1" | √ | x 3 | - | √ | √ | - | √ |
| ED-HMI2320 | CM4 | 12.1"/15"/15.6"/17"/21.5" | √ | x 1 or x 2 | √ | √ | √ | - | - |
| ED-HMI2630 | CM4 | 10.1" | √ | x 2 | √ | √ | √ | √ | √ |
| ED-HMI3010 | Pi 5 | 7"/10.1" | - | x 1 | - | - | - | - | - |
| ED-HMI3020 | Pi 5 | 7"/10.1" | √ | x 1 | √ | - | √ | - | - |
Related Products
